Skip to content
Class 1 day driverLocation BanburyShiftsMonday to Friday with occasional SaturdaysAM starts (03:00-08:00)Shifts 9-12 hours on average Pay Mon-Fri: £17.16OT after 50 hours: £22.30Saturday: £25.73RoleThis role is for an experienced (2 years of experience minimum) class 1 driver, consisting of: Store deliveries Loading and unloading (pallets) Use of pallet/pump truckRequirements We need drivers with the below: UK class 1 (C+E) driver licence In date DQC (CPC) In date drivers card (Tacho) No more than 6 points (we cannot use DR/DD/CU/MS) At least 2 years class 1 experience in the UK, preferably... more ->
HGV Class 1 Drivers Wanted In LUTTERWORTH! Logistics People are looking for HGV Drivers/HGV Class 1 Drivers/LGV Drivers/LGV Class 1 Drivers/Class 1 Drivers working on a Full time Equivalent (FTE) basis at our CML Lutterworth depot. Must be able to do occasional nights out Location : Lutterworth Working Hours : 4 On 4 Off Days and Nights Shifts Available Pay Rate: 4 On 4 Off Days £17.12 P/hr 4 On 4 Off Nights £17.55 P/hr Start time incentives: Start times between 07:00 - 13:59 & 21:00 - 23:59 Shift premium of £10 per shift Start times between 14:00 - 20:59 Shift premium of £15 per shift The... more ->
HGV Class 1 Drivers Wanted In HILSEA! Logistics People are looking for HGV Drivers/HGV Class 1 Drivers/LGV Drivers/LGV Class 1 Drivers/Class 1 Drivers working on a Full time Equivalent (FTE) basis at our Fowler Welch Hilsea depot. Must be able to do occasional nights out Location: Hilsea Working Hours : Wednesday - Saturday 4 On 4 Off 5 On 3 Off Wednesday - Saturday Days and Night Shifts Available Pay Rate: Days - £12.87 - £19.31 P/hr Nights - £14.64 - £21.98 P/hr The role consists of completing deliveries and collections. Driving Assessment Required About You You should hold a valid HGV... more ->
Approved Electrician Manchester 37.5 Hours per week - Although overtime is not guaranteed, average hours are 50+ per week for around 10 months of the year £18.47 per hour Our client provides an extensive range of services and products, including control panel and MCC manufacture, electrical and mechanical system design, certified hazardous area designs, PLC and SCADA programming, certified electrical and mechanical installations, full commissioning services and project management. In this role, you will support a dynamic, growing business, within the engineering industry, you will be working... more ->